Vandjord KR1 float switches
Vandjord KR1 is a two-positional float switch. Gold-plated contacts support operation at extra low voltage.
Vandjord KR1 is a drainage "frog" type float.
Characteristics
Max working pressure
—
2 bar
Housing material
—
PP (Polypropylene)
Protection class (IEC 34-5)
—
IP68
Mains cable length
—
10 m Other lengths available upon request.
Cable section
—
3G0,75 mm2
Cable material
—
PVC (ПВХ). Силиконовый - по запросу.
Vandjord KR1 float switches
Float switches are designed for utilization in treatment facilities and pumping units, that pump liquid, contaminated with solid particles. Due to chemical properties of materials that they are made of, float switches are resistant to various liquids, such as: raw wastewater, black water, sludge, household and utility waste waters, wastewater from washing machines, baths and showers, detergent solutions, emulsions, containing gasoline, diesel oils, grease, petroleum, acids, etc., rainwater, groundwater, chlorinated water.
Float switch operation is based on closing and opening of contacts inside of it when its position in a tank is changed. Vandjord KR1 is a float switch with a contact triggered either on emptying or on filling. No weight material. A float floats on the surface, triggering level and difference between on and off levels is adjusted by the cable unconnected end length. Versions with a plug are provided on demand. If a float switch is installed and assembled properly, it should operate for many years without any technical maintenance.
Depending on environment contamination, it is required to check the system from time to time and clean the float switch if necessary.
Float switch operation is based on closing and opening of contacts inside of it when its position in a tank is changed. Vandjord KR1 is a float switch with a contact triggered either on emptying or on filling. No weight material. A float floats on the surface, triggering level and difference between on and off levels is adjusted by the cable unconnected end length. Versions with a plug are provided on demand. If a float switch is installed and assembled properly, it should operate for many years without any technical maintenance.
Depending on environment contamination, it is required to check the system from time to time and clean the float switch if necessary.
Characteristics
|
Max working pressure
|
2 bar |
|
Housing material
|
PP (Polypropylene) |
|
Protection class (IEC 34-5)
|
IP68 |
|
Mains cable length
|
10 m Other lengths available upon request. |
|
Cable section
|
3G0,75 mm2 |
|
Cable material
|
PVC (ПВХ). Силиконовый - по запросу. |
|
Switching capacity
|
10(8)А / 250В; 10(4)А / 400В |
|
Switching angle
|
45° |
Documents