Vandjord MS1 float switches
Sewage "bulb" shaped float switch Vandjord MS1 is a two-positional float switch. Gold-plated contacts support operation at extra low voltage.
Characteristics
Max working pressure
—
2 bar
Housing material
—
PP (Polypropylene)
Protection class (IEC 34-5)
—
IP68
Mains cable length
—
10 m Other lengths available upon request.
Cable section
—
Vandjord MS1 – 3G0.75 mm2; Vandjord KR1 (S) – 3G1.0 mm2
Cable material
—
PVC (ПВХ). Силиконовый - по запросу.
Vandjord MS1 float switches
Float switches are designed for utilization in treatment facilities and pumping units, that pump liquid, contaminated with solid particles. Due to chemical properties of materials that they are made of, float switches are resistant to various liquids, such as: raw wastewater, black water, sludge, household and utility waste waters, wastewater from washing machines, baths and showers, detergent solutions, emulsions, containing gasoline, diesel oils, grease, petroleum, acids, etc., rainwater, groundwater, chlorinated water. Float switch operation is based on closing and opening of contacts inside of it when its position in a tank is changed.
Vandjord MS1 is a float switch with universal break-make contact triggered either on emptying or filling. Weighting material inside of a float makes it stay in the same location, enabling accurate triggering level adjustment with minimum difference between on and off levels. If a float switch is installed and assembled properly, it should operate for many years without any technical maintenance.
Depending on environment contamination, it is required to check the system from time to time and clean the float switch if necessary.
Vandjord MS1 is a float switch with universal break-make contact triggered either on emptying or filling. Weighting material inside of a float makes it stay in the same location, enabling accurate triggering level adjustment with minimum difference between on and off levels. If a float switch is installed and assembled properly, it should operate for many years without any technical maintenance.
Depending on environment contamination, it is required to check the system from time to time and clean the float switch if necessary.
Characteristics
|
Max working pressure
|
2 bar |
|
Housing material
|
PP (Polypropylene) |
|
Protection class (IEC 34-5)
|
IP68 |
|
Mains cable length
|
10 m Other lengths available upon request. |
|
Cable section
|
Vandjord MS1 – 3G0.75 mm2; Vandjord KR1 (S) – 3G1.0 mm2 |
|
Cable material
|
PVC (ПВХ). Силиконовый - по запросу. |
|
Switching capacity
|
1мА / 4В - 2мА / 250В |
|
Switching angle
|
10° |
Documents