APV.G
APV G series pumps are designed for withdrawal of utility and industrial waste water. They can drain water containing large amounts of solid inclusions up to 80 mm in size.
Characteristics
Pump family
—
APV
Max flow
—
18 m³/hr
Maximum head
—
14 m
Pump name
—
APV G
Cooling jacket
—
none
Impeller type
—
semi-open with chopper mechanism
APV.G
APV G series pumps are designed for withdrawal of utility and industrial waste water. They can drain water containing large amounts of solid inclusions up to 80 mm in size. APV G are equipped with a chopper mechanism, that cuts destructible solid inclusions into small parts so that they could be withdrawn through relatively small pipes. All parts, contacting the drained liquid, are made of stainless steel AISI 304 (1.4301). IP68 protection class, insulation class B (130°C) Maximum number of starts per hour – 30.
The pumps can be used for:
• drainage systems;
• emptying of excavation pits, mines, reservoirs;
• dewatering of rivers, ponds;
• dewatering of domestic sewage.
The pumps can be used for:
• drainage systems;
• emptying of excavation pits, mines, reservoirs;
• dewatering of rivers, ponds;
• dewatering of domestic sewage.
Characteristics
|
Pump family
|
APV |
|
Max flow
|
18 m³/hr |
|
Maximum head
|
14 m |
|
Pump name
|
APV G |
|
Cooling jacket
|
none |
|
Impeller type
|
semi-open with chopper mechanism |
|
Data on a name plate/certification
|
EAC |
|
Max working pressure
|
6 bar |
|
Liquid temperature range
|
0 .. 40 °C / 70 °C - до 3-х мин. работы с последующим остыванием |
|
Electric motor
|
нержавеющая сталь AISI 304/ EN 1.4301 |
|
Shaft seal
|
Sic-Sic |
|
Secondary shaft seal
|
Carbon-Sic |
|
Shaft
|
AISI 304/EN 1.4301 L stainless steel |
|
Max. ambient temp.
|
40 °C |
|
Housing material
|
stainless steel AISI 304 |
|
Size of outlet connection
|
Rp 1½” / Rp 2” / Rp 3” |
|
Maximum immersion depth
|
5 m |
|
Installation type (dry/submersible)
|
submersible |
|
Impeller material
|
stainless steel AISI 304/ EN 1.4301 |
|
Power consumption – P1
|
0,9 - 2,6 kW |
|
Rated power – P2
|
0,75 - 2,2 kW |
|
Mains frequency
|
50 Hz |
|
Rated voltage
|
1 х 220 - 230 / 3 х 380 - 400 V |
|
Rated current
|
1,7 - 8,5 A |
|
Starting method
|
direct start |
|
Max. starts per hour
|
30 |
|
Protection class (IEC 34-5)
|
IP 68 |
|
Insulation class (IEC 85)
|
B |
|
Built-in motor protection
|
да |
|
Protection against overheating
|
внутренняя / внешняя |
|
Mains cable length
|
10 m |
|
Mains plug
|
SCHUKO / без штекера |
|
Explosion proof
|
нет |
|
Float switch
|
yes / none |
Documents