CRV (I,N)
CRV-CN series presents vertical multistage centrifugal pumps. All components of these pumps, contacting with a pumped liquid, are made of high quality stainless steel AISI316.
Details
Characteristics
Max flow
—
up to 360 m³/h
Maximum head
—
up to 330 m
Max working pressure
—
33 bar
Liquid temperature range
—
-40 .. 140 °C
Max. ambient temp.
—
40 °C
Housing material
—
Stainless steel AISI 316
CRV (I,N)
CRV-CN series presents vertical multistage centrifugal pumps. All components of these pumps, contacting with a pumped liquid, are made of high quality stainless steel AISI316.
These pumps are delivered in various dimension types and with various quantity of stages to provide the required flow rate and pressure, including with rated feed up to 320 m³/h.
CRV-CN pumps can be used in the following systems, requiring focus on pump materials, for instance:
– clean in place
– technological processes in production industry
– water treatment (osmosis, softened water, etc.)
– heat power industry (boiler make-up, etc.)
CRV pumps are suitable for pumping non-viscous, explosion-proof and non-flammable liquids, not containing solid or fiber inclusions. If the pumped liquids have higher density and/or viscosity than water, it is recommended to use pumps with more powerful motors. Decision on whether a pump is suitable for pumping a particular liquid, depends on many factors, the most important of which is chloride contents, pH value, temperature and chemicals contents, etc. To assess compatibility with special liquids, contact Vandjord specialists.
These pumps are delivered in various dimension types and with various quantity of stages to provide the required flow rate and pressure, including with rated feed up to 320 m³/h.
CRV-CN pumps can be used in the following systems, requiring focus on pump materials, for instance:
– clean in place
– technological processes in production industry
– water treatment (osmosis, softened water, etc.)
– heat power industry (boiler make-up, etc.)
CRV pumps are suitable for pumping non-viscous, explosion-proof and non-flammable liquids, not containing solid or fiber inclusions. If the pumped liquids have higher density and/or viscosity than water, it is recommended to use pumps with more powerful motors. Decision on whether a pump is suitable for pumping a particular liquid, depends on many factors, the most important of which is chloride contents, pH value, temperature and chemicals contents, etc. To assess compatibility with special liquids, contact Vandjord specialists.
Characteristics
|
Max flow
|
up to 360 m³/h |
|
Maximum head
|
up to 330 m |
|
Max working pressure
|
33 bar |
|
Liquid temperature range
|
-40 .. 140 °C |
|
Max. ambient temp.
|
40 °C |
|
Housing material
|
Stainless steel AISI 316 |
|
Size of inlet connection
|
DN 25 - DN 150 |
|
Size of outlet connection
|
DN 25 - DN 150 |
|
Impeller material
|
stainless steel AISI 316 |
|
Motor standard
|
IEC |
|
Rated power – P2
|
0,37 - 110 kW |
|
Mains frequency
|
50 Hz |
|
Rated current
|
1,2 - 205 A |
|
Motor rotation speed
|
2900 rpm |
|
Number of poles
|
2 |
|
Protection class (IEC 34-5)
|
IP55 |
|
Insulation class (IEC 85)
|
F |
|
Energy efficiency class
|
IE2 / IE3 |
Documents
Photo gallery
1/1
—