NBV
NBV pumps are single-stage cantilever-and-monoblock centrifugal pumps. The pumps are equipped with asynchronous electric motors with air cooling. Shafts of the pump and electric motor are connected to each other using a special intermediate shaft and keyed joint. The pumps are embedded with a mechanical shaft end seal, and its flow part is assembled with special bronze gap seals, increasing service life of pump components.
Characteristics
Pump family
—
NBV
Max flow
—
up to 1750 m³/h
Maximum head
—
up to 150 m
Max working pressure
—
16 / 25 bar
Liquid temperature range
—
-20 .. 140 °C
Max. ambient temp.
—
40 °C
NBV
NBV pumps are single-stage cantilever-and-monoblock centrifugal pumps. The pumps are equipped with asynchronous electric motors with air cooling. Shafts of the pump and electric motor are connected to each other using a special intermediate shaft and keyed joint. The pumps are embedded with a mechanical shaft end seal, and its flow part is assembled with special bronze gap seals, increasing service life of pump components.
These pumps can be used various areas, the most common of which are listed below:
∙ centralized heat supply systems
∙ heating systems
∙ air conditioning systems
∙ centralized cooling supply systems
∙ water supply
∙ industrial processes
∙ industrial cooling
NBV pumps are suitable for pumping of non-viscous, explosion-proof and non-flammable liquids, not containing solid or fiber inclusions. If the pumped liquids have higher density and/or viscosity than water, it is recommended to use pumps with more powerful motors. Decision on whether a pump is suitable for pumping a particular liquid, depends on many factors, the most important of which is chloride contents, pH value, temperature and chemicals contents, etc. To assess compatibility with special liquids, contact Vandjord specialists.
These pumps can be used various areas, the most common of which are listed below:
∙ centralized heat supply systems
∙ heating systems
∙ air conditioning systems
∙ centralized cooling supply systems
∙ water supply
∙ industrial processes
∙ industrial cooling
NBV pumps are suitable for pumping of non-viscous, explosion-proof and non-flammable liquids, not containing solid or fiber inclusions. If the pumped liquids have higher density and/or viscosity than water, it is recommended to use pumps with more powerful motors. Decision on whether a pump is suitable for pumping a particular liquid, depends on many factors, the most important of which is chloride contents, pH value, temperature and chemicals contents, etc. To assess compatibility with special liquids, contact Vandjord specialists.
Characteristics
|
Pump family
|
NBV |
|
Max flow
|
up to 1750 m³/h |
|
Maximum head
|
up to 150 m |
|
Max working pressure
|
16 / 25 bar |
|
Liquid temperature range
|
-20 .. 140 °C |
|
Max. ambient temp.
|
40 °C |
|
Housing material
|
cast iron HT250 |
|
Size of inlet connection
|
DN 40 - DN 350 |
|
Size of outlet connection
|
DN 32 - DN 350 |
|
Impeller material
|
cast iron HT200 |
|
Motor standard
|
IEC |
|
Rated power – P2
|
0,75 - 315 kW |
|
Mains frequency
|
50 Hz |
|
Rated current
|
1,4 – 554 A |
|
Motor rotation speed
|
2900 / 1450 / 960 rpm |
|
Number of poles
|
2 / 4 / 6 |
|
Protection class (IEC 34-5)
|
IP55 |
|
Insulation class (IEC 85)
|
F |
|
Energy efficiency class
|
IE3 |
Documents
Photo gallery
1/3
—